GarageBand Tutorial for Podcasters: How to Setup, Record, and Edit a Podcast on a Mac
- Set up a template. When you first open GarageBand, it will give you the option to create a new GarageBand project either from a Factory Template selection ...
- Recording in GarageBand. Now that your recording template is set up, it's time to put it to use! ...
- Editing in Garageband. Once your recording is complete, the next step toward finishing your podcast is to edit it. ...
- Episode Assembly and Mixing in GarageBand. Once you've edited your recorded content to your liking, you'll need to arrange and mix the tracks into a cohesive episode.
Full Answer
How can you make a podcast using GarageBand?
To record a podcast episode using GarageBand:
- Open GarageBand. ...
- Next to "Save As", give the podcast episode a name, and then click Create.
- On the left, click the icon next to either "Male Voice" or "Female Voice".
- To ensure sound levels are adequate, speak into the microphone. ...
- To begin recording, click the red button, and then speak clearly into your microphone.
How to make a podcast with GarageBand?
Ten Podcast Topics for Students
- Summarize the week’s lessons in their own words.
- Explain tween/teen culture to parents/ grandparents.
- Weather reports/ forecasts (shout-out to my friend Mal for that idea).
- News and sports shows.
- “This Day in History.”
How to create a podcast template in GarageBand?
There are some ideas to use before you start recording:
- Keep the microphone about 200 millimeters or more from your mouth. You need enough distance to keep the microphone from producing any unappealing effects.
- Keep a mesh pop screen between your mouth and the microphone. ...
- Add covers around your recording room to prevent reverb. ...
- Don’t be concerned about the back of the microphone. ...
How to edit a podcast in GarageBand?
- To make splits in a clip, click on the clip so that it is highlighted in light blue.
- Then click on the Edit tab and then Split Regions at Playhead to cut the track into two parts (Shortcut: Command ⌘ + T).
- Make another split if you wish to remove a segment in the middle of your clip.
Can I use GarageBand to make a podcast?
To record a podcast episode using GarageBand: Open GarageBand. If a previous project opens, close it, and then in the window that appears, either double-click Podcast (GarageBand 09) or choose New Podcast Episode (previous versions). Next to "Save As", give the podcast episode a name, and then click Create.
How do I record a podcast on my iPhone using GarageBand?
0:087:42Create Podcast In GarageBand on iPhone or iPad - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're going to make sure we're on tracks not live loops for tracks. And we're going to slide.MoreAnd we're going to make sure we're on tracks not live loops for tracks. And we're going to slide. Until we see the audio recorder and we're gonna click on voice. Now you ready to start recording.
How do I make a podcast in GarageBand 2021?
2:364:00How to Record a Podcast in Garageband (2021 Edition)YouTubeStart of suggested clipEnd of suggested clipClick on the first. Record click on the second. Record. And now both channels are going to beMoreClick on the first. Record click on the second. Record. And now both channels are going to be recording. If and when you hit the record button. And then you can slap record both channels recording.
How long can you record a podcast on GarageBand?
All replies. A project can be up to 9999 measures long. Set the project to the minimum bpm value of 40 bpm, that will give you the maximum duration for the 9999 measures; roughly 1000 minutes recording time.
What is the best app to make a podcast?
The Best Apps to Make a PodcastGarageBand. Anyone who has recently purchased an iPad or iPhone may see GarageBand pre-installed on their devices. ... BandLab. For our Android or Pixel readers, we didn't forget about you! ... Easy Voice Recorder. Easy Voice Recorder is a free app that's the simplest voice recorder out there.
What is the best way to record a podcast?
The different ways to record a podcastRecording directly into audio editing software.Recording via video conferencing software e.g. Zoom, Skype.Recording via a remote recording platform designed to record podcast audio.Recording using a portable recording device.
What is the best way to record a podcast on Mac?
Podcast RecordingOpen QuickTime Player and select New Audio Recording. ... Start recording in QuickTime Player. ... Choose Podcast at the New Project window. ... Choose your podcast's filename and location. ... Delete any unnecessary podcast audio tracks. ... Press the record button when you're ready to begin.More items...How To Record Voice Podcasts On The Mac - ChrisWrites.comhttps://www.chriswrites.com › how-to-record-voice-podca...https://www.chriswrites.com › how-to-record-voice-podca...
Is GarageBand easy to use?
GarageBand is perfect for beginners The app is super easy to use, with features like Live Loops that let you add drum parts and basslines that match to your song. Whether you're recording vocals over a keyboard backing, or making quick beats, the platform is intuitive and you're ready to go with a couple of clicks.Is GarageBand good software for making music in 2022? - RouteNotehttps://routenote.com › blog › is-garageband-good-softwa...https://routenote.com › blog › is-garageband-good-softwa...
How do I make my podcast sound better on GarageBand?
How to Set Up Your Microphone on GarageBandNavigate to the “Master” section and turn off all plugins.Turn off the Master “Echo” Effect.Double-check your channel to ensure all FX are turned off.Create new tracks (eg intro VO, outro VO, interview, etc) and repeat the process.2022 GarageBand tutorial for podcasting - Resonate Recordingshttps://resonaterecordings.com › podcast-production › gar...https://resonaterecordings.com › podcast-production › gar...
How to record a solo podcast?
Single track recording. If you're recording a solo podcast all you'll need to do is hit the record button in the transport (or use the keyboard shortcut R). Double-check that your mic settings for the track are correct and record a test to make sure your levels are good.
How to record a podcast with multiple people?
If you're recording a multi-person podcast you'll likely want to record each person on their own track. This allows for greater flexibility in mixing down the line by keeping each sound source separate. To add an additional track, click the + symbol in the top left corner.
Can intro and outro music be on the same track?
Intro and outro music could potentially be on the same track if you're not using different processing on them. In addition to track-level effects, this approach can minimize the number of tracks you use in your mix and save vertical real estate in your workspace.
Can you create a new project in GarageBand?
When you first open GarageBand, it will give you the option to create a new GarageBand project either from a Factory Template selection or as an Empty Project. You'll be creating a custom recording template, so choose 'Empty Project.'
Can you record multiple tracks on GarageBand?
Note – if you are unable to arm multiple tracks, double-check your Recording Settings for each and make sure you have selected separate inputs. GarageBand will not record the same input to multiple tracks.
Can Auphonic transcode mp3 files?
Your host and mastering services like Auphonic will automatically transcode your file to mp3 during their process, so if you're unsure of the ins and outs of file formats, it's best to upload at a higher quality and let them handle it. With your file exported, go for a cup of coffee or a walk to refresh your ears.
Does GarageBand have fade?
Once you've trimmed an audio region or used the Split at Playhead tool, the result may be a truncated clip that stops abruptly. GarageBand doesn't have a Fade tool like many other DAWs, so you'll need to use automation to create volume changes.
How to edit GarageBand?
There are a couple of ways to edit in GarageBand: The first is to use GarageBand’s trim tool. Simply move your cursor over the botto=m right-hand or left-hand corner of an audio region, click, and drag to trim an audio region down to your desired length.
How to record multiple tracks in GarageBand?
To enable multi-track recording in GarageBand, head up to the Track menu and select Configure Track Header. In the menu that opens, check the button next to Record Enable. You’ll now see a new little button with a circle in it appear in each track header.
How many bars does GarageBand have?
GarageBand will give you a one bar count-in, which you can turn off if you want to, though it’s nice to have a little run-in time before you start recording. If you’re a fan of keyboard shortcuts in GarageBand, then you can simply use the R key to start recording.
What is single track recording?
If you’re the only person speaking on your podcast, or you’re simply recording an intro or voiceover section featuring just you, then you’ll be using GarageBand for single-track recording, which basically means you’re only recording on one audio track at a time.
Where is GarageBand on Mac?
Regardless, it’s good to jump in and make sure everything is looking how you want it to. Head up to the GarageBand menu at the top left corner of your screen , and hit Preferences.
What is the naming convention for audio tracks?
That means you won’t end up with a bunch of tracks called “Audio 1”, “Left Track 37”, and “Final Edit 14”.
How to record podcasts?
So, there are two things to remember when recording a podcast: 1 Try to keep your voice at relatively the same volume. Aim to not speak too loud or too quiet, as this will make your audio levels inconsistent. 2 Keep a consistent distance between your mouth and the microphone. An ideal distance to aim for is around 6-12 inches, meaning you don’t have to be right up close to get the perfect audio quality.
Can you add sound to GarageBand?
Users can add sound via microphone, interfaces, or musical instruments via USB or MIDI ports, or drag and drop audio files such as loops or pre-recorded sound effects. GarageBand has the features and flexibility to make a professional pop music album. Trent Reznor and Radiohead have used it.
Does Marc Maron use GarageBand?
In fact, Marc Maron has had a healthy podcasting career for years, using GarageBand, and he even got to meet the President. Let's take a closer look at GarageBand for podcast production, and see how this software can work for you.
Is GarageBand a podcast?
GarageBand may have been originally meant for musicians, but it definitely loves podcasters. In the next few steps, I'll show you how to quickly make a simple podcast episode with Garageband. These instructions won't show you all of the features available in GarageBand for podcast production. It's a basic overview.
What is GarageBand for?
GarageBand provides optimization features for each track. These include separate settings for jingles, male or female voices, or any background things you wish to incorporate. You can use GarageBand to arrange whatever tracks you have and adjust them to appear either in the front or back of the audio.
Why do you need an equalizer in GarageBand?
You need to use the equalizer feature in the GarageBand program to keep background noise and other effects from being too noticeable while you are recording your work. GarageBand features an equalizer setup that helps you create a gate over how much noise comes on your recording. You could eliminate any sounds that are at a low decibel threshold, ensuring only your voice is heard and any background features won’t be noticeable.
Why use a template for podcast?
You can use a template for your podcast if you want something that is consistent and fits with each episode you plan. A template can include separate settings for different sounds like these:
Is GarageBand good for podcasts?
GarageBand is great for your use, whether it entails working on a Mac OS or Windows PC. You can trust GarageBand when you’re trying to plan a podcast, but be sure you know how you’re going to make GarageBand work well. It won’t be hard to make GarageBand effective if you know what fits and how you’re going to plan your project.
The Basics
Before getting stuck in, a word about microphone placement and the surroundings in which you plan to record. It's usually best to set up the mic around 200 to 300 mm from your mouth, and always place a mesh pop screen between the mic and the mouth — around 30 to 50 mm from the mic is ideal.
Back At The Mac
If your mic or interface requires drivers, install them first. If you are using a USB mic, as many podcasters do, you probably won't need to, as they tend not to require additional software drivers so you can just plug in and get started.
Adding Music
A '+' button just above your newly created track lets you add another, so if you're only working with one voice let's add a second Audio track for our theme music. This is the simplest podcast setup — one track for your voice and another for the music and stings.
Step 1 – Create A Template For Your Episodes
Step 2 – Add A New Audio Track
- As soon as you open the software, you’ll be greeted with this pop-up window. Select the image with the microphone in it, and hit Create. This will create a new audio track in your session. Awesome, now you’re getting somewhere! Before you get all excited though, we still have a little more admin to do. By default, GarageBand still adds some sound effects to your audio track. No…
Step 3 – Set Up Your Audio Preferences
- Depending on your recording setup, your audio preferences may be set automatically by your Mac. Regardless, it’s good to jump in and make sure everything is looking how you want it to. Head up to the GarageBand menu at the top left corner of your screen, and hit Preferences. Navigate to the Audio/MIDI tab in the Preferences window, and make sure your audio interface or USB micropho…
Step 4 – Track Naming Conventions
- For the sake of fast workflows and easy navigation, it’s a good idea to come up with a naming convention for your audio tracks. That means you won’t end up with a bunch of tracks called “Audio 1”, “Left Track 37”, and “Final Edit 14”. You might choose to call your audio tracks Voice 1, 2, etc., or even use the names of your hosts. It ultimately depends on what is going to work best …
Step 5 – How to Record in Garageband
- Recording in GarageBand is supereasy, though you’ll need to approach things slightly differently for single-host podcasts than multi-host shows.
Step 6 – Tips For Optimal Microphone Use
- It’s important to note that while GarageBand is an incredibly capable software, it can’t make up for poor microphone technique, and editing can only help you so much. You want your podcast to have professional sound quality, right? Otherwise, you’re probably not going to impress many listeners. So, here are a few tips for optimal mic use.
Step 7 – Garageband Trim Tool
- The short answer here is yes: editing a podcast in GarageBand is super easy. It’s likely that throughout your recording, there may be some noises you want to get rid of (like coughs and breaks in speech to grab a drink of water). You can simply and quickly use GarageBand’s editing tools to clean up your audio tracks. There are a couple of ways to edit in GarageBand: The first i…
Step 8 – Splitting Audio Regions
- The second way to edit audio regions is to use the Split at Playhead function. To use this in GarageBand, simply grab the playhead and drag it to where you want to splice your audio region. Then, right click the region and select Split at Playhead. Or use the key command: Command+T.
Step 9 – Adding Music
- Now you’ve got your podcast recorded and all of your audio nicely edited. It’s time to add some music to your project. Whether you’re looking to simply add some intro and outro music, throw in some effects, or even create an entire music bed for your podcast, adding music to GarageBand is easy.
Step 10 – Arranging Audio Tracks in Garageband
- Now that you’ve got all the audio you need in your session, it’s time to do some arranging. This is a pretty simple process: just drag the audio regions around so that they flow nicely between each other, and use the edit tools you learned about earlier to make any additional cuts to your tracks.