We’ll also discuss whether you need to use a Cloudlifter with this dream podcasting setup. Quick Answer: Connect the SM7B to the Rodecaster Pro using an XLR cable and position the mic 2-3″ away from your mouth. Set your level on the Rodecaster and use a Cloudlifter if you need a level setting higher than 40.
What microphone should I use with the Shure SM7B?
The Shure SM7B is an extremely popular microphone to use with the GoXLR audio mixer. That being said, it can be overwhelming to set up, so we built this guide to make sure that your audio stream sounds amazing! If you follow these steps, you will have the perfect SM7B & GoXLR setup!
How do I set the noise gate on the SM7B?
To set the noise gate, use the following parameters: The goal of the EQ section the the GoXLR is to help your microphone sound clear and to help separate it from the game noise a little bit. If you aren’t competing with game noise, we recommend just keeping the EQ flat and letting the SM7B do the work.
Can I use the SM7B with the goxlr audio mixer?
The Shure SM7B is an extremely popular microphone to use with the GoXLR audio mixer. That being said, it can be overwhelming to set up, so we built this guide to make sure that your audio stream sounds amazing! If you follow these steps, you will have the perfect SM7B & GoXLR setup! To set the gain correctly with your GoXLR:
What software do I need to make a podcast?
Reaper is an advanced yet easy to use customizable software, and there are plenty of online tutorials available that can help you become a pro with Reaper. It has a wide range of editing and processing tools that will be a boon for making a high-quality podcast episode. Read a detailed review.
How do I set up Shure SM7B for podcasting?
3:326:15Complete Shure SM7B Setup (Everything you need to ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipDirectly into it so when you use this microphone this is why especially good for podcasting. YouMoreDirectly into it so when you use this microphone this is why especially good for podcasting. You want to get right up on it and speak directly into it and then it's going to pick up just your voice.
Is the Shure SM7B good for podcasting?
Top Quality – Shure SM7B is recognized as an industry leader, due to its dynamic range, balanced frequency response, and warm sound. Phenomenal Capabilities – flexibility makes it an excellent mic for singing vocals, voice-overs, podcasts, and radio shows.
Can you use Shure SM7B with Rodecaster?
Connect The Shure SM7B To The Rodecaster Pro Connecting the SM7B to the Rodecaster Pro is a super simple operation. You plug one end of an XLR cable into the mic and the other into the 1st XLR jack on the back of the Rodecaster Pro. We recommend using the Canare L-4E6S Star-Quad XLR cable.
Do you need Cloudlifter for SM7B?
A Cloudlifter is a device that helps boost the signal from your microphone by adding 25 dB of gain before the signal even reaches your microphone preamp. This can be especially helpful if you are using a microphone with low sensitivity, like the Shure SM7B.
Why does everyone use the Shure SM7B?
The Shure SM7B reigns as king of studio recording for good reason: vocal recording and reproduction is clear and crisp, especially when recording in a controlled environment with the flat frequency response selected. In the demo below, the flat frequency response is selected and my voice sounds unfortunately accurate.
Does SM7B need a shock mount?
The SM7B contains internal shock mounting, so external shock mounts are not required. However, higher-end boom arms do minimize the amount of desk noise transmitted to the mic.
How do you use Shure sm7b with Rodecaster pro?
1:2312:44Rodecaster Pro & Shure SM7B | Setup Tutorial & Demo - YouTubeYouTubeStart of suggested clipEnd of suggested clipBelow. So first of all we're going to set up the shure. Sm7b. We have the alternate windscreen on itMoreBelow. So first of all we're going to set up the shure. Sm7b. We have the alternate windscreen on it right now this is the windscreen that is most recommended for voice over applications.
Does Rodecaster pro need Cloudlifter?
5:347:54Does Rodecaster Pro Need A Cloudlifter? - YouTubeYouTubeStart of suggested clipEnd of suggested clipLifter. So what the cloud lifter does is it basically gives you 25 db of clean gain in exchange forMoreLifter. So what the cloud lifter does is it basically gives you 25 db of clean gain in exchange for phantom. Power. So i'm gonna connect. Another xlr cable to the back of the cloud lifter and plug it
Does Rodecaster Pro have phantom power?
RODECaster Pro includes four XLR inputs, each of which can provide (individually selectable) phantom power for condenser mics, along with four 1/4″ headphone outputs for corresponding monitoring.
Do you need a pop filter with an sm7b?
3:026:19Which Pop-filter Should You Use on the Shure SM7B? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd having no pop filter at all more on the side of having no pop filter at all it's very useless.MoreAnd having no pop filter at all more on the side of having no pop filter at all it's very useless.
How do I get the best sound out of my Shure sm7b?
5:117:22Getting the Most From Your Shure SM7B Microphone - YouTubeYouTubeStart of suggested clipEnd of suggested clipI place a pop filter an inch or two away and sing an inch or two away from the pop filter. You wantMoreI place a pop filter an inch or two away and sing an inch or two away from the pop filter. You want to experiment with distances to take advantage of the proximity. Effect or to reduce proximity.
How do I use sm7b with Cloudlifter?
0:546:05Comparing Shure SM7B with and without a Cloudlifter - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd top microphone are the one that do have the cloud lifter on the signal chain. And then theMoreAnd top microphone are the one that do have the cloud lifter on the signal chain. And then the bottom knob and bottom microphone are the ones that do not it's just going straight into the h6.
Is Shure SM7B good for gaming?
Despite the sound rates being only 16 bit/48 kHz, the sound quality still makes it a contender for the best gaming microphone of 2022. It is up there with the Shure SM7B - a step above what the likes of Blue Yeti or Razer Seiren can offer, as good as they are.
Does Shure SM7B need phantom power?
The SM7B does not require phantom power and is not affected if phantom power is present on its mixer input. Note that some third-party external pre-amps commonly used with the SM7B DO require phantom power to operate, however.
Is Shure SM7B durable?
Whether you're new to podcasting or a veteran, the Shure SM7B is a solid choice. It's durable, versatile, and consistent. It has a well-earned reputation of quality and reliability. There's a massive community of audio enthusiasts and most of them have experience with this mic.
Is the Shure SM7B worth it Reddit?
Unpopular opinion - The Shure SM7B is not worth the money for most casual users. If you listened to audio samples of the SM7B vs other lower end mics eq'd to have a similar sound, most listeners in this forum would likely not be able to reliably pick out the SM7B.
Build Quality
This microphone is one of those things that you pick up and instantly feel the build quality. It’s got a nice weight to it and feels really rugged with its metal construction.
Frequency Response
This microphone has a frequency response tailored for a speaking voice, but it is actually very versatile.
Polar Pattern
When recording or streaming voice, it’s really important to keep the noise level as low as possible. To help with that, you can use the polar pattern of the microphone to your advantage.
Plosives (P-Pops)
Sometimes plosive sounds, like P’s, B’s, and T’s will create a burst of air that hits the microphone capsule and results in a pop.
Handling Noise
While you’re streaming or podcasting, you and your guests are sure to be moving around and changing positions. Because of that, it’s important to use a microphone that can be adjusted without causing a bunch of noise. The shockmount that comes with the SM7B makes this really easy.
Proximity Effect
With any directional microphone, you’ll get a bass boost when you move closer.
Pros & Cons
Like I said in the beginning, this is one of my all time favorite mics for recording voice.
Connect SM7B to GoXLR
When you connect your SM7B to the GoXLR, you must use an XLR cable. If you use a XLR to 1/8″ Cable, you won’t get access to the good preamp inside the GoXLR.
SM7B & GoXLR Noise Gate Setting
The noise gate’s job is to mute the microphone when you’re not speaking. This will make the microphone dead silent and mute background noise like fans, cars, etc. until you start speaking again.
SM7B & GoXLR EQ Setting
The goal of the EQ section the the GoXLR is to help your microphone sound clear and to help separate it from the game noise a little bit. If you aren’t competing with game noise, we recommend just keeping the EQ flat and letting the SM7B do the work. The Shure SM7B sounds great when it’s not competing against game noise.
SM7B & GoXLR Compressor Setting
The compressor on the GoXLR is a useful tool for limiting the dynamic range of your microphone. It will help to make your loudest and quietest moments sound a little more neutral.
SM7B & GOXLR DeEsser Setting
The DeEsser on the GoXLR removes a lot of annoying S & T sounds. It also reduces annoying frequencies that accentuate mouth noise, clicking etc.
Podcast Setup: Gear
First, let’s start with the fun part of the podcast setup – the gear. I’ll write everything here in the order in which the audio (my voice) hits the device, starting with the mic.
Podcast Setup: Production Process
I switched back to Mac for my production machine – an iMac Pro to be exact. I’ll do a separate write up on that. Other than that, my production process is still pretty much the same.
Controlling Environment Sounds
Aside from improved recording gear for my podcast setup, I added three things to my office to diminish outside sounds. I’m in the basement of my house, and while this is a big improvement over when I was renting, it’s not perfect…yet.
Improvements
At this point, the only improvements I want to make are streamlining the publish process a bit, and continuing to play with my UA Arrow. There’s just so much to play with, I know I can get my audio perfect (to me). I know 99% of people won’t notice the changes, but it will make post-production and editing a lot easier.
What is SM7B microphone?
It is a dynamic microphone that works on a cardioid pattern. It is a premium, broadcast standard microphone . If you are a professional Podcaster who is all geared up for live Podcasting, this is the microphone that deserves to be in your studio.
What is the best headphone for podcasts?
The Sony MDR-7506 is a favorite among audio professionals. They are the best choice for a reference headphone as they allow you to hear the nuances in sound very clearly while you record your Podcast. The comfort and fit are great for wearing headphones for long periods.
What is a K&M boom?
The K&M Boom is a sturdy stand for supporting your mic. With its 2 pieces telescopic and T-Bar locking adjusting screw, be assured that your microphone will stay fixed at the desired position.
What software do I need to upgrade my digital audio workstation?
Once you become technologically sound, it’s time to upgrade your Digital Audio Workstation. For a medium scale setup, I recommend Reaper or Hindenburg. Reaper is an advanced yet easy to use customizable software, and there are plenty of online tutorials available that can help you become a pro with Reaper.
Is the Audio Technica a plug and play mic?
Both the microphones have a plug and play set up. The Audio Technica is a condenser mic with a sleek and elegant design. It has a second layer in addition to the wire mesh, which does a great job of eliminating noise. AT 2020 supports Cardioid polar pattern, and it is compatible with both Windows and Mac.
Unboxing
- Let’s take a look at what comes in the box. Inside, you’ll find: 1. (1) Microphone 2. (1) Microphone Stand Adapter (5/8″ to 3/8″) 3. (1) Rear Panel Cover Plate 4. (2) Windscreens 5. (1) Instruction Manual
Build Quality
- This microphone is one of those things that you pick up and instantly feel the build quality. It’s got a nice weight to it and feels really rugged with its metal construction. There is a built-in shock mount that reduces the handling noise when readjusting the mic, which is really handy for podcasting and streaming. The adjustments make it possible to fine-tune the position of the mic…
Frequency Response
- This microphone has a frequency response tailored for a speaking voice, but it is actually very versatile. The frequency response ranges from 50 Hz to 20kHz with the option for a low rolloff and a presence boost in the high mid frequencies.
Polar Pattern
- When recording or streaming voice, it’s really important to keep the noise level as low as possible. To help with that, you can use the polar pattern of the microphone to your advantage. The SM7B has a cardioid polar pattern, which means that it rejects sounds coming from behind the microphone. Using the polar pattern to your advantage, you can point the microphone toward yo…
Plosives
- Sometimes plosive sounds, like P’s, B’s, and T’s will create a burst of air that hits the microphone capsule and results in a pop. Luckily the SM7b is really good at preventing those pops from ruining your recording. Without the windscreen, you’ve really got to pay attention to your microphone technique, but with the windscreen you don’t really need to worry about it. If you stil…
Handling Noise
- While you’re streaming or podcasting, you and your guests are sure to be moving around and changing positions. Because of that, it’s important to use a microphone that can be adjusted without causing a bunch of noise. The shockmount that comes with the SM7B makes this really easy. These mics are designed to be used with microphone arms, so I would definitely recomme…
Proximity Effect
- With any directional microphone, you’ll get a bass boost when you move closer. This can be a good thing in broadcasting if you’re going for that radio DJ sound, but if you don’t want that sound, you can always keep some distance between you and the microphone or use the low rolloff switch on the back. In the video at the top of this page, you can listen to the sound quality at vari…
Pros & Cons
- Like I said in the beginning, this is one of my all time favorite mics for recording voice. It’s got a natural sound out of the box and can be adjusted to tailor the sound to your unique voice. It also has excellent noise rejection and handling isolation – two essential qualities of a broadcast mic. All in all, this is one of the first microphones I would recommend for streaming and podcasting, …